Gas Engine TCG 2016

400 - 800 kW el

Suitable for all gas types. Mainly used for biogas plants and small CHP plants.

  • Output range from 400 to 800 kWel
  • Low installation and operating costs
  • Mainly used for biogas plants and small CHP plants in Europe

MWM TCG 2016 V08, V12, V16 Gas Engine – Efficiency across the board!

Compelling arguments – Features at a glance.

  • Output range from 400 to 800 kWel
  • High Flexibility
  • Runs on all gas types: natural gas, biogas, landfill gas, sewage gas, mine gas, etc.
  • Mainly used for biogas plants and small CHP plants in Europe
  • Highest electrical efficiency in the output range up to 1,000 kWel
  • More than 1900 power generators with approximately 1,000,000 kWel already installed around the globe
  • Low installation and operating costs

The MWM gas engines of the TCG 2016 series are perfectly geared to the challenges of a dynamic market environment. Our models in the output range of 400 – 800 kWel meet the high requirements of a broad range of applications and guarantee efficiency, reliability, flexibility and environmental sustainability, together with low lifecycle costs and high profitability.

Description – MWM Gas Engine TCG 2016

Consumes up to 15 Percent Less Gas than Comparable Gensets Thanks to Its Best-of-Class Efficiency

  • Special piston variants with different compression for biogas and natural gas operation
  • Optimized gas exchange and camshaft, spark plugs with integrated pre-combustion chamber
  • Even load balancing over the individual cylinders enables higher load level and maximum utilization of the engine reserves in terms of output and efficiency
  • New closed crankcase ventilation optimizes combustion and increases efficiency by utilizing the blow-by gas
  • Consistent downsizing of dead spaces improves complete combustion of the gas mixture, resulting in reduced fuel consumption and HC- and CO-emissions and higher efficiency

Long Service Intervals

  • Longest time interval until major overhaul compared to competitors
  • Use of Xchange components enables time savings of up to 75 percent during the major overhaul, resulting in reduced costs
  • Turbocharger for TCG 2016C series, depending on application with water-cooled bearing housing, thus reducing maintenance costs for turbocharger
  • No contamination of the turbocharger compressor thanks to improved separation of gas and liquid phase, resulting in long maintenance intervals

Very Low Lubricant Consumption

  • With its lubricant consumption of only 0.1 – 0.2 g/kWh, TCG 2016C sets competitive standards
  • Lubricant savings of up to 50 percent compared to competitors

Lower Investment Costs – MWM Gas Engine TCG 2016

Niedrige Installationskosten dank kleiner Abmessungen

Low Installation Costs Thanks to Smaller Dimensions

  • Compact genset design saves investment costs through smaller engine space and fewer plant peripherals
  • Setup space up to 50 percent smaller than for comparable gensets

High Flexibility – MWM Gas Engine TCG 2016

TEM Control Enables Use of Diverse Gas Types

  • Same electrical output with natural gas and biogas
  • Further information on the TEM control

Performance Data – MWM Gas Engine TCG 2016

Natural gas applications, NOx ≤ 500 mg/Nm3 *

TCG 2016 V08 CTCG 2016 V12 CTCG 2016 V16 C
Engine type50 Hz60 Hz50 Hz60 Hz50 Hz60 Hz
Electrical outputkW400400600600800800
Thermal output ± 8%kW427445654675854886
Electrical efficiency%42.341.442.041.342.541.6
Thermal efficiency%45.246.045.846.545.346.3
TCG 2016 V12 C_515
Engine type50 Hz
Electrical outputkW515
Thermal output ± 8%kW513
Electrical efficiency%43.2
Thermal efficiency%43.1

 

Biogas, landfill gas, and sewage gas applications, NOx ≤ 500 mg/Nm3 *

TCG 2016 V08 CTCG 2016 V12 CTCG 2016 V16 C
Engine type50 Hz60 Hz50 Hz60 Hz50 Hz60 Hz
Electrical outputkW400400600600800800
Thermal output ± 8%kW393415593632788827
Electrical efficiency%42.841.642.741.442.841.7
Thermal efficiency%42.043.142.243.642.243.2

* 5% O2 and dry exhaust gases

Specifications and Service Intervals – MWM Gas Engine TCG 2016

Dimensions and Weights

TCG 2016 V08 CTCG 2016 V12 CTCG 2016 V16 C
Engine type50 Hz60 Hz50 Hz60 Hz50 Hz60 Hz
Lengthmm309031703690377040904130
Widthmm149014901490149015901490
Heightmm219021902190219021902190
Dry weight gensetkg534051207000626084506780
Bore / strokemm132/160132/160132/160132/160132/160132/160

 

Service Intervals

 First service (check valve clearance)Cylinder head inspectionMajor overhaul
Natural gas and purified biogas, landfill gas, and sewage gas2000 oh32000 oh*64000 oh
Unpurified biogas, landfill gas, and sewage gas1500 oh12000 oh*48000 oh

* “at the latest”

MWM Premium Antifreeze -20

MWM Premium Antifreeze -20

High-performance coolant for MWM diesel and gas engines.

Read more
MWM Gas Engine Premium Oil

MWM Gas Engine Premium Oil

Test MWM Premium oil for gas engines.

Read more
MWM Original Spare Parts

MWM Original Spare Parts

With its logistics center in Lorsch, Germany, MWM guarantees efficient and reliable global spare-part supply.

Read more

Gas engines & Products

Gas Engine TCG 3016

New development – greatly reduced operating and installation costs and fully digitized power plant control.

Read more
MWM TCG 2032

Gas Engine TCG 2032

High reliability. Low operating costs. Gas types: natural gas, landfill gas, sewage gas, mine gas, coke oven gas. Mainly used in large IPP projects with up to 100 MWel.

Read more
MWM TCG 3020 V20

Gas Engine TCG 3020

The All-Round Talent. Smart, secure plant control. Higher output and profitability despite compact design.

Read more
Container Cogeneration Plant

Container Cogeneration Plant

Compact modules for the TCG 3016, TCG 3020 and 2020 gas engines. Complete turnkey systems for special applications.

Read more